9
The wireless key fob gives you additional access to your system,
enabling you to:
•
Check the current system status (armed, disarmed, or “not
ready”).
•
Arm the system in Arm Away mode or Arm Stay mode.
•
Disarm the system before entering the premises.
•
Send an audible Panic alarm for police assistance.
Checking System Status
1. Tap and hold Disarm for 1.5 seconds to show the LED light that will
verify the current status of security system.
2. The LED flashes amber once to indicate it has communicated with the
system then:
• Solid green for three seconds indicates system is disarmed.
• Solid red for three seconds indicates system is armed.
• Solid amber for three seconds indicates system is not ready to be
armed (open zone, trouble).
Arming the System
From the key fob, you can arm your system in Arm Away mode or Arm
Stay (Arm Night mode must be performed from the Touchscreen or
Subscriber Portal).
Arm Away
1. Press and hold Arm for 1.5 seconds to activate the Arm Away function.
• One red flash indicates key fob has contacted the system, then
displays solid red for three seconds to indicate beginning of exit
delay.
• LED will flash amber seven times when the door/window is open
or when the sensor is faulted.
Arm Stay
1. Double tap and hold Arm for 1.5 seconds to activate the Arm Stay
function.
• One amber flash indicates that the key fob is communicating with
touchpad.
• Solid red for three seconds indicates the Arm Stay function is
activated with no exit delay.
• LED will flash amber seven times when door/window is open or
when the sensor is faulted.
Key Fob Keychain Remote
Summary of Contents for SmartHOME
Page 31: ...28 Notes ...
Page 32: ...MidcoSmartHOME com 1 800 888 1300 MC64 PM UG 0316 ...