Page 8
Attaching Vertical Mounting Brackets to Flat Panel
NOTE:
The brackets are indicated (L) Left and (R) Right.
1) Place the flat panel face down on a soft, flat
surface and
identify the number and location of screws.
2) Align the holes on each vertical mounting bracket with the
threaded inserts on the flat panel.
(FIGURE E)
NOTE:
To ensure a neat appearance, center vertical
mounting brackets on flat panel. Do not extend
brackets past top or bottom of flat panel.
3) Secure each vertical mounting bracket with the
screws and hardware identified in previous
steps. Use a minimum of (2) mounting screws per
vertical mounting bracket.
Flat Panel
Universal
Washer
Nylon Spacer
Vertical
Mounting
Bracket
Mounting
Screw
FIGURE E
FLAT PANEL INSTALLATION (CONTINUED)
WARNING!
This operation re
quires two people. Do not release your flat panel until you are certain
that the top hook of each vertical mounting bracket is securely seated on the upper rail of the
horizontal mounting bracket.
!
Flat Panel
Vertical Mounting
Bracket
FIGURE G
Horizontal
Mounting
Bracket
Locking
Brackets
FIGURE F
Hanging the Flat Panel
1) Lower both locking brackets on vertical mounting brackets.
(FIGURE F)
2) Raise the flat panel slightly above the top and
bottom rails on the horizontal mounting bracket.
(FIGURE G)
3) Place the flat panel down slowly, ensuring that
the top and bottom hooks on the vertical mounting
brackets properly engage the horizontal
mounting bracket.
(FIGURE G)
