Chapter 3: Using the Web Interface
117
Users must accept the agreement, or they cannot log in.
An event notifying you if a user has accepted or declined the agreement can be generated. See
page 124).
To enable the service agreement:
1.
Click Device Settings > Security > Service Agreement.
2.
Select the Enforce Restricted Service Agreement checkbox.
3.
Edit or paste the content as needed.
•
A maximum of 10,000 characters can be entered.
4.
Click Save.
Understanding the Login Manner After Enabling the Service Agreement
Login manner after enabling the service agreement:
After the Restricted Service Agreement feature is enabled, the agreement's content is displayed in the login screen.
Do either of the following, or the login fails:
•
In the web interface, select the checkbox labeled "I understand and accept the Restricted Service Agreement."
Tip: To select the agreement checkbox using the keyboard, first press Tab to go to the checkbox and then Enter.
•
In the CLI, type
y
when the confirmation message "I understand and accept the Restricted Service Agreement" is
displayed.
Setting the Date and Time
Set the internal clock on the PDU manually, or link to a Network Time Protocol (NTP) server.
To set the date and time:
1.
Choose Device Settings > Date/Time.
2.
Click the Time Zone field to select your time zone from the list.
3.
If the daylight saving time applies to your time zone, verify the Automatic Daylight Saving Time Adjustment checkbox is
selected.
•
If the daylight saving time rules are not available for the selected time zone, the checkbox is not configurable.
