Chapter 3: Using the Web Interface
143
5.
For SNMP INFORM communications, leave the resend settings at their default or do the following:
a.
In the Timeout field, specify the interval of time, in seconds, after which a new inform communication is resent if the
first is not received. For example, resend a new inform communication once every 3 seconds.
b.
In the Number of Retries field, specify the number of times you want to resend the inform communication if it fails.
For example, inform communications are resent up to 5 times when the initial communication fails.
6.
For both SNMP TRAPS and INFORMS, enter the following as needed and then click OK to apply the settings:
a.
Host name
b.
Port number
c.
User ID for accessing the host -- make sure the User ID has the SNMPv3 permission.
d.
Select the host security level
Security level
Description
"noAuthNoPriv"
Select this if no authorization or privacy protocols are needed.
"authNoPriv"
Select this if authorization is required but no privacy protocols are required.
•
Select the authentication protocol - MD5 or SHA
•
Enter the authentication passphrase and then confirm the authentication
passphrase
"authPriv"
Select this if authentication and privacy protocols are required.
•
Select the authentication protocol - MD5 or SHA
•
Enter the authentication passphrase and confirm the authentication passphrase
•
Select the Privacy Protocol - DES or AES
•
Enter the privacy passphrase and then confirm the privacy passphrase
7.
Click Create.
Switch Outlets
This action turns on, off or power cycles a specific outlet.
To create a switch outlets action:
1.
Choose Device Settings > Event Rules >
.
