Chapter 3: Using the Web Interface
191
4.
Type a name for the inlet.
For example, you can name it to identify the power source.
5.
Click Save.
6.
The inlet's custom name is displayed on the Inlet or Dashboard page, followed by its label in parentheses.
To reset the inlet's active energy counter:
Only users with the "Admin" role assigned can reset active energy readings.
1.
Choose Inlet.
The Inlet page appears.
2.
Click the Settings title bar as shown.
3.
Click
.
4.
Click Reset on the confirmation message.
This inlet's active energy reading is then reset to zero.
Tip: To reset ALL active energy counters on the PDU, see PDU
Summary in the section title:
Information in parentheses adjacent to the title is the total number of alerted sensors.
For example:
•
1 Critical: 1 sensor enters the critical or alarmed state.
Numeric sensors enter the critical state.
State sensors enter the alarmed state.
•
1 Warned: 1 'numeric' sensor enters the warning state.
List of alerted sensors:
Two icons are used to indicate various sensor states.
Icons
Sensor states
For numeric sensors:
•
above upper warning
•
below lower warning
