10
Maintenance guide
Clearing a blockage
Ensure the stick vac is not plugged into the mains supply and is switched
off before dismantling the vac.
The stick vac would only become blocked if the dust cup has exceeded
the 'Max' level, the filters are clogged up or a large object has been
sucked up.
1.
Check the dust cup and empty if necessary.
2.
Check the 2 filters in the unit, remove any debris/dust and wash if
necessary.
3.
If the floor head, crevice or brush multi-tool were in use, detach them
from the main body or extension pole and check for blockages.
Remove any blockages.
4.
Detach the extension pole and look down it to see if there are any
blockages. If there are, use the handle of a broom to clear the
obstruction. Take care not to damage the pole in the process.
5.
Check the roller brush for any hair or thread which may have
become wrapped around the roller. Cut away with a pair of scissors.
To do this safely, remove as shown in the 'Removing and cleaning the
floor head roller brush' section of this manual.
Storing the cordless stick vac
Your stick vac can be stored safely and securely by hanging from
the wall mount supplied with your product or by removing all the
attachments and stowing together in a cupboard. Either way will help
avoid the product falling over and causing damage.
Always turn off and unplug from the mains supply before storing.
1.
Remove any attachments if the stick vac was last used with them on.
2.
Store the stick vac and accessories away safely in a dry place.
