Service manual for Dryer Machine
-------------------------------------------------------------------------------------------------------------------------------------------------------
－
22
－
4. TROUBLE SHOOTING
4.1 Test mode by Control
Make sure the door are closed, press [Time Adjust] and [Buzzer] at the same time within 3s after
power on, then unit will go into test mode, scree will show St.
4.2 Test modes
1. Press [Time Adjust] again, screen will show 01, after 0.5s, the screen will show software
version;
2. After 3s, screen shows 02, turn the knob to right or left to check it. Every time you turn knob,
L1(2LED6~2LED17 ) state light will change accordingly, light on or off.
3. Press [Time Adjust] again, screen will show 03, unit will go into key checking mode:
-Press [My cycle 1], screen will show 11, L2(2LED1~2LED5 ) light up;
-Press [My cycle 2], screen will show 22, L3(2LED18~2LED20 ) light up;
-Press [Delay], screen will show 33, L3(2LED21~2LED25 ) light up;
-Press [Dryness], screen will show 44, L4(2LED26~2LED30 ) light up;
-Press [Temp], screen will show 55, L5(2LED32~2LED33 ) light up;
-Press [Buzzer], screen will show 66;
-Press [Wrinkle Release], screen will show 77;
-Press [START/PAUSE], screen will show 88;
-Press [POWER], screen will show 99.
