MCAC-ATSM-2013-11 Aqua Tempo Power Series (with LAK) air cooled scroll chiller unit (50Hz)
167
Note:
Working mode setting is valid only when the unit is power off.
4) Set clock
▲
This time the hour of the clock will flash, it means the
current setting is the hour of the clock, press the
“▲”
or
“▼”
to adjust, press
“
”
key when finished, and then
the minute of the clock will flash, it means the current
setting is the minute of the clock, press the
“▲”
or
“▼”
to adjust, press
“
OK
”
key when finished or wait for 7
seconds to be effective; during the setting process press
the
“
Cancel
”
key, then it will exit without saving.
Note:
For getting the correct timing on and timing off hour, please correctly set the clock!
15.3.3 Combination of key functions
1) HYSTERESIS setting function
a. Through the hysteresis setting, the system can adjust the load effectively.
b. The adjusting logic of cooling mode
: (the parameter of δ1,δ2,Tj1 and Tj2 are decided by the outdoor unit)
c.
The adjusting logic of heating mode: (the parameter of δ1,δ2,Tj1 and Tj2 are decided by the outdoor unit)
▲
Summary of Contents for Aqua Tempo Super Series
Page 48: ......
Page 62: ...MCAC ATSM 2013 11 Aqua Tempo Power Series with LAK air cooled scroll chiller unit 50Hz 61...
Page 69: ...Aqua Tempo Power Series with LAK air cooled scroll chiller unit 50Hz MCAC ATSM 2013 11 68...
Page 72: ...MCAC ATSM 2013 11 Aqua Tempo Power Series with LAK air cooled scroll chiller unit 50Hz 71...
