MCAC-ATSM-2013-11 Aqua Tempo Power Series (with LAK) air cooled scroll chiller unit (50Hz)
189
2
）
Set wired controller separately: Do not tick the
“
Uniformly Set
”
. Select the wanted set wired controller
(refrigeration system) from the wired controller address column and select the corresponding set parameters,
which include control Mode (Auto), Mode set (cooling/heating/Water pump/turn-off), Setting temp. (Cooling:
5~17
℃
; Heating:45~50
℃
). After set up all above parameters (See Fig. 4-88), please click the
“
System
operate set
”
, system begins to set up. A message box (See Fig. 4-89) will pop up. Once successful setting,
a message box as Fig. 4-90 will display to inform you Successful System Set, whereas, Failed System set
as Fig. 4-91 will display.
3
）
Uniformly set all wired controllers: Tick Uniformly Set as Fig. 4-92, and then select the corresponding
parameters, click the System Operate Set, system starts to set up. A message box as Fig. 4-93 will display
during the setting. Once successful setting, a message box as Fig. 4-94 will display to inform you Successful
System Set, whereas, Failed System set as Fig. 4-95 will display. After all setting done, a message box (see
Fig. 4-96) will dis
play informing “Setting Finish”.
Fig.4-88
Fig.4-89
Fig.4-90
Fig.4-91
Fig.4-93
Fig.4-92
Fig.4-95
Fig.4-94
Summary of Contents for Aqua Tempo Super Series
Page 48: ......
Page 62: ...MCAC ATSM 2013 11 Aqua Tempo Power Series with LAK air cooled scroll chiller unit 50Hz 61...
Page 69: ...Aqua Tempo Power Series with LAK air cooled scroll chiller unit 50Hz MCAC ATSM 2013 11 68...
Page 72: ...MCAC ATSM 2013 11 Aqua Tempo Power Series with LAK air cooled scroll chiller unit 50Hz 71...
