background image

                   
 
 

                                                            Service Manual_2018-V2.0

 

8

 

responsibility to comply with federal and local regulations when disposing of this product. 

12) 

This freezer is intended to be used in household and similar environments. 

13) 

Do not store or use gasoline or any flammable liquids inside or in the vicinity of this 

freezer. 

14) 

Do not use extension cords or ungrounded (two-prong) adapters with this freezer. If 

the power cord is too short, have a qualified electrician install an outlet near the freezer. 
Use of an extension cord can negatively affect the freezer’s performance. 

Grounding requirement 

This freezer must be grounded. This freezer is equipped with a cord having a 

grounding wire with a grounding plug. The plug must be inserted into an outlet that is 
properly installed and grounded. 

Improper use of the grounding plug can result in a risk of electric shock. Consult a 

qualified electrician or service person if the grounding instructions are not completely 
understood, or if doubt exists as to whether the freezer is properly grounded. 

2.2 Safety instruction for refrigerant

 

Explosion Hazard.

 

Keep flammable materials and vapors, such as gasoline, away from freezer. Failure to 
do so can result in fire, explosion, or death.

 

Safety instruction for refrigerant

 

DANGER–Risk of Fire or Explosion. Flammable Refrigerant Used. To Be Repaired Only 
By Trained Service Personnel. Do Not Use Mechanical Devices. Do Not Puncture 
Refrigerant Tubing. CAUTION–Risk of Fire or Explosion. Flammable Refrigerant Used. 
Consult Repair Manual/Owner’s Guide Before Attempting To Service This Product. All 
Safety Precautions Must be Followed. CAUTION–Risk of Fire or Explosion. Dispose of 
Properly In Accordance With Federal Or Local Regulations. Flammable Refrigerant 
Used. CAUTION–Risk of Fire or Explosion Due To Puncture Of Refrigerant Tubing; 
Follow Handling Instructions Carefully. 
Flammable Refrigerant Used.

 

 

 

 

 

Summary of Contents for CHEST FREEZER Series




































Reviews: