Service Manual_2018-V2.0
23
There is a light switch on the side wall of the refrigerating
chamber.1
）
Loosen the hook with small normal
screwdriver and pull out the switch until the wire
connector reveals.
8.4Compressor case
Rear cover
(None)
Compressor and the cooling system pipe
1
）
Cut off the power, remove the goods in the
refrigerator, with the tape to make the door fixed firmly
and prevent the door dropping when the refrigerator
dumping.
2
）
Slowly tilt the refrigerator forward, relying on the wall
or a solid enough object, leaving space to facilitate the
operation. For safety, it should be carried by someone to
prevent its falling.
3
）
Cut off the compressor pipeline.-
❶
Cut off the
process pipeline.-
❷
Cut off the low-pressure
muffler.-
❸
Cut off the high-pressure exhaust pipe.
Summary of Contents for COMBI HD-273FN
