3.3 How to use MC-IHD361
3.3.1 Start cooking
Touch the ON/OFF control for about two seconds.
After power
on, the buzzer beeps once, the power indicator light will flicker,
indicating that the induction hob has entered the state of
standby mode.(If no any operation for 60 seconds after that it
will enter into power off state.)
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Select a heat setting by touching the “-” or “+” control.
• You can modify the heat setting at any time during cooking.
If the buzzer beep alternately with the heat setting (Only
induction
zone
)
.
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
If Right ceramic zone is activated, Left induction zone is limited up to
1400W.
EN-11
