7
Instruction for use
Operation steps:
1. Power on, child lock indicator (blue) lights up.
2. Press and hold the child lock button (
≥3s), the blue indicator light goes out and
unlocks.
3. After unlocking, the power indicator (blue) lights up.
4. Press the power button, the power indicator flashes, and the time control function
keys (30 min and 60 min) indicators (blue) light up.
5. Select the sterilization time 30 min or 60 min, the time control function key indicator
(blue) flashes and enter the power-on state.
6. After entering the power-on state, the buzzer sounds slowly (prompting personnel to
leave). Please leave the sterilization place in time. After about 10 seconds, the buzzer
sounds quickly until it lights up. (Intelligent human body induction detection, after about
20 seconds, there are no moving objects around, start to light) Enter the sterilization
state.
7. After the lighting reaches the sterilization set time (30 min/60 min), the table lamp will
automatically turn off to complete the sterilization activity.
Notice:
•
Intelligent human induction detection range: less than 5 meters in radius.
•
When the person enters the environment by mistake, after the intelligent human
induction detects, the lighting of the lamp stops and the buzzer sounds (prompts
the person to leave). After the person leaves for about 10 seconds, the buzzer
stops, and the intelligent human body detects for about 20 seconds. There are no
moving objects around, and the lighting continues to enter the sterilization state
(accumulated sterilization working time).
•
After the UV germicidal lamp is turned on, people enter more than 3 times within
5 minutes, the lighting of the lamp stops, and the child lock indicator lights up.
•
In the process of turning on the ultraviolet germicidal table lamp, the intelligent
human body sensing detection is unstable within 2 minutes, the lighting of the
lamp stops, and the child lock indicator lights up.
