Instructions
8
1.
Turn on the power, then touch “ ” button to select the corresponding
function and touch “ ” button to let the
appliance
run for preheating.
2.
After the preheating is completed,
the
appliance
will beep and d
isplay
"ADD", hold the top of the
appliance
with one hand, and pull
the b
asket
out by holding the
handle of the ba
sket
with the other
hand. The ba
sket
must be placed
on
an even surface
.
3.
Put the ingredients
i
n the
inner
basket
.
4.
Push the frying
basket
into the
appliance
, after the
appliance
is powered on,
select your desired function and
it
will show
the
default
time
and temperature.
Adjust where needed and touch
" " to start.
Note:
When the
basket
is not thoroughly pushed
in
,
the micro switch is not triggered; the
appliance
is at
the power-off state of getting the ba
sket
and it won’t work.
At that time, you only need to totally push the frying
ba
sket
into the
appliance
.
If the basket is removed during
cooking, the appliance will switch off and resume cooking
when the basket is put back into the appliance.
5.
After reaching half of the set heating, the
appliance
beeps 3 times, you can
pu
ll
out the b
asket and turn food if required.
6.
The
appliance
will beep when the timer has finished counting down.
Instructions for use
Please carefully take it out. Do put it on the desk flatwise so as to avoid
being scalded by steam or topping over the frying barrel which may lead to
scalding by oil or high temperature food. In addition, the auxiliary tools (such
as chopsticks) are suggested to be used in the process of taking out food.
