background image

7

Operating the appliance!

•     Before washing the clothes at first time, the product 
       shall be operated in one round of the whole procedures 
       without the clothes inside.
•     Flammable and explosive or toxic solvents are forbidden.
       Gasoline and alcohol etc.Shall not be used as detergents.
       Please only select the detergents suitable for machine 
       washing, especially for drum.
•     Make sure that all pockets are emptied. Sharp and rigid 
       items such as coin,brooch,nail,screw or stone etc. may 
       cause serious damages to this machine.
•     Please check whether the water inside the drum has  
       been drained before opening its door.Please do not open 
       the door if there is any water visible.
•     Be careful of burning when the product drains hot 
       washing water.
•     Never refill the water by hand during washing.
•     After the program is completed, Please wait for two 
       minutes to open the door.

          6.A precaution indicates that the  appliance shall not  
             be installed at a humid place.
•     Please do not close the door with excessive forces. If it 
       is found difficult to close the door, please check if the 
       clothes are put in or distributed well.
•     It is forbidden to wash carpets.

SAFETY INSTRUCTIONS

Summary of Contents for MF100D85B





























Reviews: