2
condenser and evaporator.
n
For installation, always contact the dealer or an Authorized service center.
There is risk of fire, electric shock, explosion, or injury.
n
Do not install the product on a defective installation stand.
It may cause injury, accident, or damage to the product.
n
Be sure the installation area does not deteriorate with age.
If the base collapses, the air conditioner could fall with it, causing property damage, product failure,
and personal injury.
n
Do not let the air conditioner run for a long time when the humidity is very high and a
door or a window is left open.
Moisture may condense and wet or damage furniture.
n
Take care to ensure that power cable could not be pulled out or damaged during
operation.
There is risk of fire or electric shock.
n
Do not place anything on the power cable.
There is risk of fire or electric shock.
n
Do not plug or unplug the power supply plug during operation.
There is risk of fire or electric shock.
n
Do not touch (operation) the product with wet hands.
There is risk of fire or electric shock.
n
Do not place a heater or other appliance near the power cable.
There is risk of fire and electric shock.
n
Do not allow water to run into electric parts.
It may cause fire, failure of the product, or electric shock.
n
Do not store or use flammable gas or combustible near the product.
There is risk of fire or failure of product.
n
Do not use the product in a tightly closed space for a long time.
Oxygen deficiency could occur.
n
When flammable gas leaks, turn off the gas and open a window for ventilation before
turn the product on.
Do not use the telephone or turn switches on or off.
Summary of Contents for MOA-07HN1-QC2
