4
2. Function
When the power supply is
interrupted and then restore, the air
conditioners automatically restore
the previous function setting.
Maintain the room temperature in accordance with the
setting temperature.
The
mode can be change by the room temperature.
The louver can be set at the desired position or
swing up and down automatically
The function is usually used in rainy days in
springtime or damp areas.
The fan is turn to low speed (cooling/heating).
The unit will be turn off at the seventh hour.
The unit will decide the louver direction according to
operation mode.
Turbo wind, high, med, low, breeze.
Restarting is for approx. 3 minutes..
Prevent the water being frozen on evaporator by sensing
the evaporator pipe temperature in cooling mode
Room temperature sensor.
Pipe temperature sensor.
Indoor unit
Operation by remote controller
Sensing by room temperature
Room temperature control
Anti-freezing control in cooling
Time Delay Safety control
Indoor fan speed control
Two-direction air vane
Sleep mode auto control
Independent dehumidification
Air flow Direction control
Auto mode
Temp. Compensation
Flexible wiring connection
Auto defrost
Anti-cold function
Self-diag. function
Auto-restart function
Timer function
Prevent the cold wind at the
beginning of unit start.
Summary of Contents for MOF-24HDN1-QC2W
Page 10: ...8 5 Refrigerant cycle diagram...
Page 11: ...9 6 Wiring diagram 6 1 Indoor Unit...
Page 12: ...10 6 2 Outdoor Unit...
