7
REVERSING THE DOOR
Take the hinge from the supplied accessory bag and
fasten it to the left side base of the refrigerator.
Before replacing the doors onto the hinge, locate the
hinge assembly at the base of both refrigerator and
freezer doors. Remove the current plastic hinge assembly
and install the left hand hinge assembly from the
accessory bag supplied. Position the plastic spacer before
installing the door.
Line up the middle hinge. Position the refrigerator door
and fasten in position with two (2) screws.
Note: Do not fasten hinge screws completely until the
doors have been positioned correctly.
Carefully position the freezer door onto the middle hinge.
Align the door before securing the top hinge.
Align each door to ensure they are positioned correctly.
Check that the door seals correctly and they open and
close without obstruction.
Tighten the screws holding the hinges in place (refer to
steps 8,10 and 11).
Place the cover over the hinge bracket on the left side.
Once the doors are in place and all screws (top, middle
and bottom hinge brackets) are securely tightened, insert
the cap on right side of the refrigerator and doors.
8.
9.
11.
10.
12.
13.
14.
step 10
step 9
step 11
step 13
step 14
step 8
