The beer machine uses AC power supply of 110~120V/60 Hz. If the voltage
fluctuation exceed the range of 110~120V
±
10%, it can cause faults or even
damage of beer machine. Or it may result in indoor circuit overheat to cause fire.
Then it should be equipped with automatic voltage regulator of over 750W for use.
When gas or other combustible gas is revealed, you should turn off the gas valve,
and then open the door. At this time do not pull out the plug of beer machine and
other electric appliance, so as not to cause fire by the spark.
Safety warnings
Electricity-related matters
Related matters for usage
10 A
Do not pull the power cord when pull the power plug of the beer machine. Grasp the
plug firmly and pull out the plug directly. Don't pull the plug with wet hands.
Please use the standard special three-hole power socket more than 10A,which
should not be shared by other appliances.
To avoid danger, if the power cord is frayed or damaged, they must be replaced
by professionals from the maintenance department of the manufacturer or the
related department.
The power cord should be fixed at the back of the box instead of being exposed
outsides and dangling to prevent accidents. Never damage the power cord.
Avoid using them when the power cord is damaged or the plug becomes frayed.
The power cord plug and power socket should be fixed firmly, otherwise they
may cause fire. Please see to it that the grounding pole of the socket should
have reliable grounding wire.
Usually, we suggest that you should not use extension cord, and the power of
the rated voltage is 115 V, the current more than 10 A. The Fuse (circuit breaker)
should be 15 A.
Do not attempt to repair or replace any part unless your equipment is
recommended by the manual model. The other services shall be kept by the
qualified technical personnel.
Don't use water to spray or flush the beer machine. Besides, don't put beer
machine in damp place which is accessible to water. do not affect the electrical
insulation performance of beer machine .
Since folding cardboard and plastic film may cause choking danger, don't give
the packing or other parts to children for fun ! Do not let children enter or climb
beer machine to keep the children from the danger.
Please pull out the plug in the case of power off and cleaning.
Please don't put weight in the top of beer machine. It is easy to cause the
dropping of items and accidental injury.
Don't make the beer machine for pedal or support.
Related matters of abandoning
Beer machine contains combustible materials of refrigerant R134a. It should be isolated from the fire
when abandoned. It can't be burnt, but should be processed by the professional recycling company,
so that it can avoid harming the environment or causing other dangers.
Once beer machine fall into disuse, it should be placed on the shelf or somewhere beyond the reach
of children to prevent children from being hurt.
Correct manipulation of the beer machine
Names of each component
Placement
Put the beer machine in smooth, flat and
strong place indoors.
Remove all packing
materials before using
the beer machine.
Avoid the direct sunlight,
and keep away from heat
sources such as stoves,
heaters, and radiators.
The hot air from the side wall of beer machine
must be able to exclude unrestrictedly.
Otherwise, the compressor must improve
power to increase the power consumption.
Therefore, the distance between the beer
machine, wall and the surrounding furniture
cannot be less than 10cm.
Starting
For the first starting, please leave the beer machine alone about 2~3 hours to plug in.
Clean the chamber of the beer machine before the first operation (see the
maintenance of beer machine ).
Please let the beer machine work 2-3 hours before putting the barrel beer into
the beer machine.
beer tower assembly
upper cover guardrail
water box
Display and control
device
Evaporator
Mixed ball valve
Beer barrels
Door
beer can bottom pad
compressor
chamber cover
Control board device
CO can supporter
2
CO gas cylinder
2
CO regulator valve
2
Cabinet
Top cover
universal wheels
2
3
Summary of Contents for WHS-199BSS1
Page 1: ...WHS 209BESS1...
