ADVANCED OPERATIONS
Besides the basic functional operations above, you may have more features using FUNCTION
button. When this function is engaged, all letters on the display will be followed by three dots
for identification. Please note that there are two dots only when split feature engaged
CHANNEL SETTING
Press FUNCTION button, the display will show “F-“ to prompt you to input a function code.
Then press CHANNEL button, the current channel number will appear on the display. Use +,
- button to increase or decrease the channel number you desire. You can also press numerical
buttons 0 - 9 to enter the number directly ranging of 1 to 16. You must enter all 2 figures, for
example, 01, 12 etc. If you don’t complete data entry by 3 seconds, the display will recover to
previous figure. If the figure exceeds 16, it’ll turn to 1 automatically.
TRANSPOSE
Press TRANS button, the current note shift in semitone will appear on the display. Use +, -
button to increase or decrease the note shift you desire ranging of -12 to +12. About 3 seconds
after you complete the operation, the display will return to indicate program number. The note
will be transmitted as the physical key you are playing with shift of transpose value.
VOLUME
Press FUNCTION button, the display will show “F-“ to prompt you to input a function code.
Then press VOLUME button, current volume will appear on the display. Now, you can set
volume your desire ranging from 1 to 128. You can also use + or - button to change it.
Transmitted volume is the figure on the display minus 1. For example, volume “099” on the
display is transmitted as 98, etc. About 3 seconds later after you complete the operation, the
display will return to indicate program number.
10
