4: Memory Pedal - Once press down the pedal, the memory code will be
increase by one and relevant settings will be recalled.
About 3 seconds after you complete the operation, the display will return to
indicate program number.
WHEEL DEFINITION
Press FUNCTION button, the display will show “F-“ to prompt you to input a
function code. Then press button 6 (WHEEL), current wheel definition code will
appear on the display. Now, you can define the feature of the Modulation wheel
in the unit using numerical button or + / - button to change it ranging from 1 to
128. Now, when you roll the Modulation Wheel, the parameter change with
MIDI control you defined will be transmitted directly.
Transmitted control code is the figure on the display minus 1. For example,
volume “099” on the display is transmitted as 98, etc.
About 3 seconds later after you complete the wheel definition operation, the
display will return to indicate program number.
MSB
Press FUNCTION button, the display will show “F-“ to prompt you to input a
function code. Then press button 7 (MSB), current MSB control code will
appear on the display. Now, you can change MSB using numerical button
or + / - button to change it ranging from 1 to 128.
Transmitted MSB is the figure on the display minus 1. For example, “099” on
the display is transmitted as 98, etc.
About 3 seconds later after you complete the operation, the display will return to
indicate program number.
