background image

BASIC OPERATIONS

PROGRAM SETTING

Press  PROGRAM  button,  the  current  program  number  will  appear  on  the

display. Use +, - button to increase or decrease the program number you desire.

You can also press numerical buttons 0 - 9 to enter the number directly ranging

of 1 to 128. You must enter all 3 figures, for example, 001, 012, 126 etc. If you

don’t  complete  data  entry  by  3  seconds,  the  display  will  recover  to  previous

figure.

Note:

Transmitted program change is the number on the display minus 1. For example,

program number “001” on the display is transmitted as “000”, etc.

TRANSPOSE

Press  TRANS  button,  the  current  note  shift  in  semitone  will  appear  on  the

display. Use +, - button to increase or decrease the note shift you desire ranging

of -12 to +12.

About  3  seconds  after  you  complete  the  operation,  the  display  will  return  to

indicate program number.

The  note  will  be  transmitted  as  the  physical  key  you  are  playing  with  shift  of

transpose value.

OCTAVE

Press OCTAVE button, the current octave shift will appear on the display. Use

+, - button to increase or decrease the octave shift you desire ranging of -2 to +2,

i.e., two octave down or up.

About  3  seconds  after  you  complete  the  operation,  the  display  will  return  to

indicate program number.

Summary of Contents for MidiStudio 2



















Reviews: