Midland BT RUSH, Instruction Manual

11

EN

No Midland Intercom

Attention: In order to use the “Universal Intercom” feature the pairing on 

the other unit must be done as a phone. The other intercom (non-Midland 

brand) will be able to use a phone only if two phones are supported.
You can pair also a Midland unit as Universal Intercom, that means the pai-

ring must be done as a phone (one unit use the Universal Intercom procedure 

and the other unit use the pairing to “Phone” procedure).

Pairing the Midland BT Rush to phone and GPS 

navigator/TFT Dashboard

The Midland 

BT Rush

 unit can be paired to other Bluetooth devices, like 

Phone, GPS Navigator. The pairing procedure must be done using the 

Vol+

 or the 

Vol-

 buttons.

› Pairing to the Vol+ button:

 for Phone with music A2DP stereo, GPS 

Navigator with A2DP audio or Bluetooth TFT system integrated in the 

motorbike. 

› Pairing to the Vol- button:

 for Phone or GPS Navigator only with 

mono HFP audio. 

When a device is paired to the 

Vol+

 or 

Vol-

 buttons the “Phone” mode 

is activated.

Vol +

Vol -

MONO

 › Phone (HFP Mono)

 › GPS mono

MONO and STEREO 

 › Phone (HFP/A2DP Stereo)

 › GPS (HFP/A2DP Stereo)

 › TFT system

Background feature 

The 

BT Rush

 unit keeps always any audio coming from 

Vol+

 or 

Vol-

 pairing 

always in background to the Mesh communication. In case of Bluetooth 

Intercom communication instead, you need to take advantage of the 

“Background” feature to have the audio from the device paired on 

Vol-,

in background. 

Background audio on Bluetooth intercom communication

When the Bluetooth Intercom communication is active only the audio 

souce paired to the

 Vol-

 can be in background to the Bluetooth Intercom 

conversation.

All devices paired to 

Vol-

 button have higher priority over the Bluetooth 

Intercom communication and will interrupt all other audio communica-

tions (including FM Radio and Music).

Background setting for Vol- audio over Bluetooth Intercom 

1.  Keep pressed 

Vol-

 button, you will hear the voice “Background on”. 

Now the audio from the 

Vol-

 pairing is available in background to the 

Bluetooth intercom.

2. Press again the 

Vol-

 button and you will hear the voice “Background di-

sable”. Now the audio from the 

Vol-

 pairing will interrupt the Bluetooth 

intercom communication. 

Attention: 

By default the background is enabled.

.

Pairing with one or two phones

The cellular phone can be paired to the 

Vol+

 or to the 

Vol-

. 

When a phone is paired to the 

Vol+

 or “Vol-” the “Phone” mode is acti-

vated.

An incoming call has always the higher priority, that means all other com-

munications will be closed (Intercom, FM Radio, Music).

If another incoming call will arrive on the second phone, an alert sound 

will notify it.

WARNING! In order to have the best performance with your mobile phone, 

it is suggested to keep it as close as possible to your BT Rush unit, on the 

left side of your body and in the upper pocket of your jacket if it’s possible.

How to pair the Midland BT Rush to a Phone

To pair the Midland 

BT Rush

 to a Phone, you must first enter the 

Setup 

Mode

 mode:

1.  Turn off the unit

2. Press and hold down the Control button about 7 sec., until the 

Red