VIBRATE ALERT (GXT400/450 Series only)
To turn the
VIBRATE ALERT
on, press the
MENU
button five times so
the display will show the
VIBRATE-ALERT
icon blinking, while on the
right of the CHANNEL NUMBER, an “
oF
” icon appears. Select
“on”
by pressing the buttons and push the
PTT
button, or press
MENU
button again to move to the next feature setting. The
VIBRATE
ALERT
icon will remain on the display.
To turn the
VIBRATE ALERT
off, press the
MENU
button five times,
so the display will show the
VIBRATE ALERT
icon blinking, while on
the right of the
CHANNEL NUMBER
, an “
on
” icon appears. Select
“
oF
” by pressing the buttons and push the
PTT
button, or press
MENU
button to move to the next feature setting. The
VIBRATE
ALERT
icon will go off.
ROGER BEEP (end of transmission) TONE
When the
PTT
button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the
ROGER BEEP
tone on, press the
MENU
button until the
display shows an “
rb
” icon while on the right of the “
rb
” display, an
“
oF
” icon appears. Select “
on
” by pressing the buttons and push
the
PTT
key, or press
MENU
button to move to the next feature
setting.
To turn the
ROGER BEEP
tone off, press the
MENU
button until the
display shows an “
rb
” icon while on the right of the “
rb
” display, an
“
on
” icon appears. Select “
oF
” by pressing the buttons and push
the
PTT
key, or press
MENU
button to move to the next feature
setting.
®
Page 12
www.midlandradio.com
/
/
/
/
Model GXT300/325/310/400/450 Series
