Contents inside the packing:
•
1 microphone with velcro
•
2 earphones with velcro
•
1 PTT button
•
Fixing adhesives
Instructions
1. Mount the section A inside the helmet: the two loudspeakers and the microphone
must be applied according to the position of your mouth and ears. Use the adhesives
to better fix of the cables inside.
2. Apply the section B to the handlebar of your motor vehicle: the PTT button, when
pressed, activates the transmission of the transceiver.
Use the supplied velcro for the PTT and to fix it in the best way to press it easily and
to allow a safe driving at the same time.
3. The section C is composed of a cable which allows the connection of the radio to
the PTT button and to the earphones/microphone.
Refer to the picture hereupon for the connection of all the three sections to the transceiver.
MA46
SPEAKER-MICROPHONE HELMET KIT
MA46 is a speaker-microphone helmet kit, suitable for transceivers, composed of one
microphone, 2 earphones, speaker and a PTT button. When connected to a transceiver,
MA46 allows you to communicate easily with other users without interfering with your
driving, ensuring absolute safety. The kit has been projected to be easily installed and
the three parts can be simply joined each other thanks to their proper plugs. By
disconnecting one of these plugs, you can even take off your helmet, leaving the
microphone and the earphones inside (they must be previously positioned inside the
helmet). When necessary, you can then re-connect all the kit by a simple and quick
operation. MA46 comes standard with a PTT button, which can be applied to the
handlebar of your motor vehicle with the supplied velcro: when pressed, PTT allows
you to activate the transceiver transmission.
For maximum working of the kit, the microphone should be mounted away from wind
noise: in this way, you avoid the air recycling on the microphone.
NOTE:
To avoid the cables getting in the way, it is strongly suggested to pass them
underneath your jacket / external clothes.
1. Microphone
2. Speakers
3. Plug A
4. PTT button
5. Plug B
6. Plug to connect to the radio
7. Plug to connect to PTT button
(plug B)
8. Plug to connect to the speaker-
microphone/s (plug A)
1
2
3
4
5
6
7
8
®
UP
516
DOWN
A
B
C
