14 |
XT5 instruction guide
1.
VOX function activated
2.
Appears when the keypad lock is activated
3.
Battery level
4.
It is displayed when the radio is receiving a signal
5.
Appears when the radio is transmitting (PTT pressed)
6.
Indicates the selected CTCSS tone
7.
Indicates the selected channel
8.
Antenna
9.
LCD Display
10.
MON/SCAN.
Press to enable the Scan mode; keep pressed to activate
the Monitor function.
11.
MENU/ :
Keep pressed to turn the radio on/off. Press to enter the ra-
dio’s menu.
12.
▼/
1 2
3
4
5
6
7
8
9
11
10
12
15
16
14
13
17
: Press this button to decrease the volume or to scroll through the
menu. Keep it pressed to lock the keypad.
13.
Microphone
14.
Speaker
15.
▲/
CALL.
Press to increase the volume or to scroll through the menu.
Keep pressed to send out a call tone
16.
PTT button
17.
Battery and battery compartment.
XT5 operates with 4 x AAA batteries
(alkaline or rechargeable).To ease the installation of the batteries, at first
remove the belt clip. Then remove the battery cover by pressing it and
sliding it down from the radio. Insert 4 AAA batteries observing the po-
larity. Close the battery compartment with the battery cover by sliding it
up on the radio and place the belt clip again, making sure it properly locks .