6
www.midlandusa.com
Compatible Systems
The XTC300 can be used on both a PC or MAC . Below are the compatible
operating systems:
Windows XP SP2
Windows Vista
Windows 7
Macintosh OSX 10 .4 and higher
For Windows we recommend Windows Media Player 10 or higher .
For Macintosh we recommend Quick Time 6 .5 or higher .
Downloading Videos
Downloading Videos on a PC with a WINDOWS Operating System
1 . Connect the camera to the USB port using the included cable .
2 . Turn the camera on by moving the RECORD switch to the
record position .
3 . The device should automatically install .
4 . Operating system
a . Windows XP
i . Open “My Computer” . The camera will be
listed under devices with removable storage .
b . Windows Vista
i . Open “Computer” . The camera will be
listed under devices with removable storage .
c . Windows 7
i . Open “Computer” . The camera will be
listed under devices with removable storage .
5 . Click on the device .
6 . Open DCIM Folder .
7 . Open 100MEDIA folder .
8 . Your videos will be in this folder .
There is no need to install any software with the XTC300 . It is a plug
and play device . With this, follow the below instructions depending upon
whether you have a PC or a MAC .
Downloading Video on a MAC
1 . Connect the camera to the USB port using the included cable .
2 . Turn the camera on by moving the RECORD switch to
the record
position .
3 . MAC will automatically recognize the camera external hard drive .
4 . Click on the icon on the desktop .
5 . Open DCIM Folder .
6 . Open 100MEDIA folder .
7 . Your videos will be in this folder .
8. Drag video files to your hard drive or double click to view.
SD video
HD video
Processor
2 .8 GHz or faster
3 .5 GHz or faster
Ram
512 MB or greater
1 GB or greater
Video Card
128 MB or greater
256 MB or greater
Minimum System Requirements
Video playback requires H .264 codec . To obtain more information
go to http://www .midlandusa .com/
This device complies with part 15 of the FCC Rules . Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation .
Warning:
Changes or modifications to this unit not expressly approved
by party responsible for compliance could void the user’s authority to
operate the equipment . Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules . These limits are designed to provide
reasonable protection against harmful interference in a residential
installation . This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with
instructions, it may cause harmful interference to radio
communications . There is no guarantee that interference will not
occur in a particular installation . If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna .
Increase separation between equipment and receiver .
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected .
Consult the dealer or an experienced radio/TV
technician for help
FCC Information
