3 |
P a g e 1 0 - 3 3 1 - 2 R E V A
MNChinook 200M Instructions
Disclaimer
All specifications are subject to change without prior notice.
•
The information given in this user manual is believed to be accurate and reliable.
•
MidNite Solar
assumes no responsibility for omissions or inaccuracies.
•
The user of this information and product assumes full responsibility and risk.
•
The Chinook 200M Micro-Turbine is a source of electrical power. It must be installed in accordance with
all applicable electrical regulations and best practices.
•
The Chinook 200M Micro-Turbine has moving parts, and
Sharp Blades
that may cause injury due to
poor installation and unsafe handling or operation.
•
MidNite Solar
assumes no responsibility for problems caused by unsafe or unsatisfactory installation or
operation.
Made in Arlington, Washington USA by:
MidNite Solar Inc.
17722 67
th
AVE NE
Arlington, WA 98223
PH: (360) 403-7207
Fax: (360) 691-6862
www.MidniteSolar.com
Introduction
Please read this manual thoroughly before attempting to assemble, install or operate your
Chinook 200M
small wind
turbine. This will assure optimum performance and safety. This manual applies to:
MNCHINOOK-12M, 12V Turbine
MNCHINOOK-24M, 24V Turbine and
MNCHINOOK-48M, 48V Turbine.
A separate manual is supplied with the CDL (Chinook Diversion Load).
The MN
Chinook 200M
has been designed to be simple, economic, durable, and yield excellent performance.
Thanks to its unique design; the
Chinook 200M
is not susceptible to corrosion in normal operating conditions. With
double sealed bearings and powder coated finish, the Chinook200M is made specifically for
marine installations,
Applications include:
Sailboats
Cathodic protection
Monitoring sites
Remote homes / off grid
Wind-electric water pumping
Street lighting and road signage
Farm utilities (electric fencing, irrigation, etc.)
Telecommunications
