manualshive.com logo in svg

MidNite Solar Chinook 200 Marine, Assembly And Use Instructions

The MidNite Solar Chinook 200 Marine is a durable and reliable solar product. For detailed Assembly and Use Instructions, download the free manual from 88.208.23.73:8080. This comprehensive guide will ensure you get the most out of your solar charger controller while out on the water.

Share
Download
background image

             

 

 

5 | 

P a g e                                                                 1 0 - 3 3 1 - 2   R E V A

 

 

MNChinook 200M Instructions

 

 

 

Specifications

:   

Turbine Name: 

Chinook 200 Marine

   

Part Number: MNCHINOOK200M   
Nominal Voltage: 12 / 24V / 48V DC   
Rotor Blades: Glass Reinforced Nylon   
Rotor Diameter: 1 Meter (3.28 Feet)   
Rated Wind Velocity: 14m/s (31.30 mph)   
Rated Output: 200 Watts   
Max Output: 250 Watts   
Start-up Wind Velocity: 3.5m/s (7.8 mph)   
Total weight: 6.3 Kg (14 lbs)   
Tower mount: 1.5” Sch 40 Diameter pipe   
Chassis Construction: Aluminum 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for Chinook 200 Marine


















Reviews:

No comments

Related manuals for Chinook 200 Marine

SkyWind Energy NG Owner'S Manual preview
NG
Brand: SkyWind Energy Pages: 105

Brands by name

Popular brands

Load more brands