SMA E-Panel installation manual
3 |
P a g e
1 0 - 2 3 4 - 1 R E V : A
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
- These instructions contain important safety and operating
instructions for the MidNite SMA E-Panel.
If you do not fully understand any of the concepts, terminology, or hazards outlined in these instructions, please refer installation to a
qualified dealer, electrician or installer. These instructions are not meant to be a complete explanation of a renewable energy system.
GENERAL PRECAUTIONS
If service or repair should become necessary, contact MidNite Solar Inc. Improper servicing may result in a risk of shock, fire or
explosion. To reduce these risks, disconnect all wiring before attempting any maintenance or cleaning. Turning off the inverter will
not reduce these risks. Solar modules produce power when exposed to light. When it is not possible to disconnect the power coming
from the Photovoltaics by an external means such as a combiner, cover the modules with an opaque material before servicing any
connected equipment.
Do not work alone. Someone should be in the range of your voice or close enough to come to your aid when you work with or near
Batteries.
Remove rings, bracelets, necklaces, watches etc. when working with photovoltaic modules or other electrical equipment. Power from
an illuminated photovoltaic array makes a very effective arc welder with dire consequences if one of the welded pieces is on your
person.
All installations must comply with national and local electrical codes. Professional installation is recommended.
Wiring must be done in accordance with the National Electrical Code ANSI/NFPA 70. Use Class 1 wiring methods
for field wiring connections to terminals of a Class 2 circuit. Use only 14-1/0 gauge AWM wire. Select the wire
gauge used based on the protection provided by the circuit breakers/fuses.
MidNite products are not intended for use in connection with Life Support Systems. MidNite Solar makes no
warranty or representation in connection with their products for such uses.
Disclaimer
Every effort is made to ensure the completeness and accuracy of all technical reference material, still,
unless specifically agreed to in writing, MidNite Solar Inc.
(a) Makes no warranty as to the accuracy, sufficiency or suitability of any technical or other information
provided in its manuals or other documentation.
(b) Assumes no responsibility or liability for loss or damage whether direct, indirect, consequential or
incidental, which might arise out of use of such information. The use of any such information will be
entirely at the user's risk.
If service or repair of the E-Panel should become necessary, contact MidNite Solar Inc. For other parts of
the system refer to the manual included with that equipment and contact the manufacturer for support.
Improper servicing may result in a risk of shock, fire or explosion. To reduce these risks, disconnect all
wiring before attempting any maintenance or cleaning. Turning off the inverter will not reduce these risks.
Solar modules produce power when exposed to light. When it is not possible to disconnect the power
coming from the Photovoltaics by an external means such as a combiner, cover the modules with an
opaque material before servicing any connected equipment.
