SMA E-Panel installation manual
9 |
P a g e
1 0 - 2 3 4 - 1 R E V : A
Mounting the SMA E-Panel to the wall cont.:
Install the inverter mounting bracket before
mounting the backplate to the wall. Use ¼-
20 bolts and flat washers. Pressed in nuts
are provided on the backplate.
Ensure that the inverter bracket is centered
and is resting on the mounting screws
(down on the screws and not slid up).
Mounting on back of inverter
Inverter mounting bracket
mounted to backplate
Backplate mounted to wall
The inverter rests on the tab of the
inverter mounting bracket.
Caution!!
The inverter is
very
heavy. Have
strong persons assist you.
Attention!!
L’inverter est
très
lourd. Avez des
gens très forts vous assister.
Secure inverter to bracket with the
M6x10 screws provided.
Left and right sides.
Cover with fan grills provided.
The grills are marked left and
right.
