Midwest Industries, Inc.
Ida Grove, IA 51445 800-859-3028 0004549
Page 15 of 23 shorestation.com 12-3-
19
asd
2021-12-16
4
–
Fully lift the boat
Hold the up button on the remote control or on the dock switch to raise
the boat. Continue running
the lift until the limit
switches turn the lift off. If
limit switches are not
installed, run the lift until
both sides (port and
starboard) stop moving.
This ensures that both lift
cylinders are fully retracted
and the lift platform is
level. Avoid running the lift for more than a few seconds when both
sides are not moving.
5
–
Lock out the lift and remotes
Turn the lockout switch to the off position
(vertical) and remove the key.
The remote controls will automatically lock if
not used for more than 3 minutes. You can
lock the remotes before the 3 minute period
by holding both the UP and DOWN buttons on
the remote until the light stops flashing.
