Notes for test institutes
103
Energy efficiency class according to EN 60350-1
The energy efficiency class is determined in accordance with EN 60350-1.
Energy efficiency class: A+
Please observe the following when conducting testing:
- Testing is undertaken using the
Eco Fan heat
function.
- Select the
Lighting
|
“On” for 15 seconds
setting (see “Settings – “Lighting”).
- Only accessories that are required for testing should be in the oven
compartment during tests.
Do not use other accessories that might be available such as FlexiClip runners
or catalytic enamelled panels (e.g. side panels or roof liners).
- An important pre-condition for determining the energy efficiency class is that the
door must be tightly shut during testing.
Depending on which measurement devices are used, the functioning of the door
seal can be affected to a greater or lesser extent. This will have a negative
impact on the test results.
Pushing against the door will compensate for this. In certain unfavourable
circumstances, suitable technical aids may also be necessary for this. This issue
does not occur in normal use.
Data sheet for household ovens
In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
66/2014
MIELE
Model name/identifier
H 7164 B, H 7264 B
Energy efficiency index/cavity (EEI
cavity
)
81.7
Energy efficiency class/cavity
A+++ (most efficient) to D (least efficient)
A+
Energy consumption per cycle for each cavity in conventional mode
1.05 kWh
Energy consumption per cycle for each cavity in fan-forced convection
mode
0.71 kWh
Number of cavities
1
Heat source(s) per cavity
electric
Volume of cavity
76 l
Mass of the appliance
42.0 kg
Summary of Contents for 11 190 803
Page 84: ...Installation INSTALLATION 84 Side view A H 71xx 43 mm H 72xx 47 mm ...
Page 105: ......
Page 106: ......