Warnings and safety instructions
11
The plastic housing of the water connection contains an electrical
valve. The housing must not be dipped in water.
There are live wires in the water intake hose. Do not shorten the
hose, even if it is too long.
The integrated Waterproof system offers protection against water
damage, provided the following conditions are met:
- Installation has been carried out correctly.
- The dishwasher is properly maintained and parts are replaced in
case of noticeable damage.
- The water supply faucet is turned off during longer absences from
the home (e.g., while on vacation).
The Waterproof system will work even when the dishwasher is
turned off. However, the dishwasher must remain connected to the
domestic electrical supply.
The water-connection pressure needs to be between 50 and
1,000 kPa.
A damaged dishwasher could be dangerous. If the dishwasher
gets damaged, turn it off at the electricity supply immediately and
contact your Miele dealer or Miele Service.
The manufacturer’s warranty will be invalidated if the appliance is
not repaired by a Miele authorized service technician.
We recommend replacing defective components with original
spare parts. If original Miele spare parts are installed correctly, Miele
ensures full compliance with safety requirements and the warranty
remains valid.
During installation, maintenance, and repair work, the dishwasher
must be disconnected from the domestic electricity supply (turn it off
and withdraw the plug from the socket).