6 Cleaning and maintenance
|
English
Quick guide PTD 901
|
12019630; 2021-09
|
47
Terminate the self-cleaning programme
6.3
Cleaning the warewasher at the end of the working day
Cleaning the warewasher interior
Ensure that there are no rusty foreign objects in the interior of the warewasher, which
could cause even “stainless steel rust-free” material to start to rust. Rust particles can
come from non-rust-free wash items, from cleaning aids, damaged wire grate racks or
from water pipes that are not protected against rust.
The following aids may
not
be used for cleaning:
– Detergents containing chlorine or acid
– Cleaning sponge or wire brush containing metal
– Abrasives or abrasive cleaning agents
Ø
Remove dirt with a brush or a cloth.
Cleaning the outside of the warewasher
Ø
Do not spray the warewasher and the surrounding area (panels, floor) with a steam jet
or high-pressure cleaner.
Ensure when cleaning the floor that the plinth of the warewasher is not flooded, to pre-
vent an uncontrolled inflow of water.
Ø
Clean the display with a damp cloth.
Ø
Clean the external surfaces using a stainless steel cleaner and stainless steel polish.
Cleaning the upper and lower wash field
