Moisture Plus
66
The Moisture Plus
mode can only
be used in the upper oven.
The upper oven is equipped with a
steam injection system for cooking with
moisture. Baking, roasting and cooking
with Moisture Plus
creates
optimized steam delivery and air flow
for consistent cooking and browning
results.
After selecting Moisture Plus
you
need to set the temperature and the
number of bursts of steam.
Available options are:
–
Automatic burst of steam
This requires enough water for one
burst of steam. The burst of steam
will be injected into the oven
automatically after the heating-up
phase.
–
1 Burst of steam
2 Bursts of steam
3 Bursts of steam
You need to add the appropriate
amount of water for the number of
bursts of steam. You have to release
the bursts of steam yourself.
The water is injected as bursts of steam
into the oven cavity during the cooking
program. The steam inlets are located
at the rear left corner of the roof of the
oven.
One burst of steam takes approx. 5–8
minutes. The number of bursts of steam
and when they are injected will depend
on the type of food being cooked:
–
Yeast doughs
will rise better if steam
is injected at the beginning of the
program.
–
Bread and rolls
will also rise better if
exposed to steam at the start.
Injecting a burst of steam at the end
of the program will give the bread
and rolls a shiny crust.
– When
roasting meat with a high fat
content
, injecting steam at the
beginning of roasting will help render
the fat.
Moisture Plus is not suitable for
mixtures which contain a lot of
moisture, such as choux pastry and
meringues, as the addition of steam
does not allow them to dry out
sufficiently.
Summary of Contents for 22678055USA
Page 16: ...Guide to the oven 16 ...
