en - Areas of application
40
Middle position
Move the roller brackets on both sides to the centre position and
screw them tight.
Insert the connector into the opening in the centre and click it into
place by pushing it to the left as far as it will go. Screw the con-
nector tight. Attach the blanking covers to the each of the openings
above and below, click them into place and screw them tight also.
Lower position
Move the roller brackets on both sides to the upper position and
screw them tight.
Insert the connector into the opening at the top and click it into
place by pushing it to the left as far as it will go. Screw the con-
nector tight. Attach the blanking covers to the two openings below,
click them into place and screw them tight also.
Then check
Replace the upper basket on the rails and push it in carefully to
check that the water connector is positioned correctly.
