![background image](http://html.mh-extra.com/html/miele/apcl-series/apcl-series_installation-instructions-manual_235855007.webp)
Umbau- und Montageanweisung
M.-Nr. 11313371
7 von 61
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
16.07.2020
Included parts
No.
Mat. no.
Designation
1
Plinth
4
Plug S16
4
Washer 15 x 44 x 3
4
Hexagonal-head wood screw 12 x 90
4
Threaded pin M10 x 50
12
Nut M10
8
Washer B10.5
8
Underlay
2
Clamping plate
4
Raised-head screw CEM 6 x 12
2
Hexagonal bolt M6 x 20
Danger due to incorrectly carried out service and repair work
WARNING
Danger due to incorrectly carried out service and repair work
There is a risk of serious damage, injury and even death if service and repair work is carried out incorrectly.
A
Service and repair work should only be carried out by a suitably qualified electrician with specialist training,
knowledge and experience.
A
All appropriate safety regulations must be taken into account.
A
First read the Technical Service Documentation (TSD), then commence work.
Measures to be carried out before commencing any service work
- Carry out appropriate electrical safety checks.
- Disconnect all machine utility connections in accordance with the operating instructions.
Measures to be carried out after service work has been completed
- Carry out appropriate electrical safety checks.
- Check the appliance for correct operation.
Risk of cuts during service and maintenance work
WARNING
Components may have sharp edges.
There is a risk of cuts during service and maintenance work.
A
Protective gloves should be worn.
Danger of injury due to excess physical strain
WARNING
Danger of injury due to excess physical strain.
Spinal injuries.
A
The relation of the weight of the machines to the physical strength of the technician must be taken into account.
For machine weight details, see the operating instructions.