Frequently asked questions
126
Problem
Possible cause and solution
The oven does not heat
up.
Demo mode is activated.
The oven can be operated by will not heat up.
Deactivate Demo mode (see "Settings –
Showroom Program").
Power Failure - Program
Canceled
appears in the
display.
There has been a power failure which has caused the
current cooking process to stop.
Turn the oven off and then back on again.
Restart the cooking process.
12:00
appears in the
display.
The power supply was interrupted for longer than 200
hours.
Reset the date and time.
Maximum operating duration
reached
appears in the
display.
The oven was operated for an unusually long period
of time. The Safety cut-out feature has been
activated.
Confirm with OK. Clear the message
Program
Finished
by selecting "Back".
The oven is now ready to use.
Fault XX
appears in
the display.
A fault has occurred that you cannot resolve.
Contact Miele Technical Service.
Door not locked
appears
in the display.
The Self Cleaning program door lock is not locking.
Turn the oven off and then back on again. Then
restart the Self Clean program.
If the message appears again, contact Miele
Technical Service.
Door not released
appears
in the display.
The door lock for the Self Clean program will not
deactivate.
Turn the oven off and then back on again.
If the door lock still does not deactivate itself,
contact Miele.
No signal to roast probe.
Reposition roast probe in the
oven.
appears in the
display.
The wireless roast probe is not recognized.
Reposition the probe in the food.
If the oven still does not recognize the wireless roast
probe, it may be faulty. A replacement roast probe
can be ordered from Miele.