IMPORTANT SAFETY INSTRUCTIONS
8
Technical safety
Installation and repairs may only be carried out by a Miele-author‐
ized service technician. Installation, repairs and other work by un‐
qualified persons can cause considerable danger to users.
A damaged coffee system could be dangerous. Before building in
the machine, check it for any externally visible damage. Do not use a
damaged machine.
Before connecting the coffee system, check the voltage and fre‐
quency indicated on the data plate against the voltage and frequen‐
cy of the household electrical supply.
This data must correspond in order to prevent damage to the coffee
system. If in doubt, consult a qualified electrician.
Be certain your appliance is properly installed and grounded by a
qualified technician. To guarantee the electrical safety of this appli‐
ance, continuity must exist between the appliance and an effective
grounding system. It is imperative that this basic safety requirement
be met. If there is any doubt, have the electrical system of the house
checked by a qualified electrician.
Reliable and safe operation of the coffee system can only be
guaranteed if it is connected to the electrical supply.
Do not connect the machine to the electrical supply using an ex‐
tension cord or power bar.
The coffee system may not be used in mobile installations such
as ships.
For safety reasons, this machine may only be used when it has
been built in.
If the coffee system is to be built in above another appliance,
there must be a full-width, closed shelf between them.
Only use the coffee system in rooms where the ambient tempera‐
ture is b50°F (10°C) and +100°F (38°C).