Preparation for extraction
^
When using
C
150 mm ducting,
secure the exhaust connection
supplied to exhaust ducting with
hose clips.
^
Place the exhaust ducting on the fan
connection for the rangehood.
^
See "Connection for air extraction" for
further instructions on fitting the
ducting.
Recirculation
If site conditions are not suitable for the
rangehood to be used with air
extraction, the appliance must be set
up for recirculation.
For this, conversion kit DUU 151
(available from Miele Chartered Agent
or Miele) is required.
You will also need two charcoal filters
(see “Technical data”).
Installation
19
Summary of Contents for DA 2050
Page 27: ...27 ...
Page 28: ...Alteration rights reserved 3013 M Nr 09 723 310 00 ...