Operation (Manual mode)
30
Activating/deactivating power
management
Switch off the blower and the lighting.
Press the delayed shutdown
control
for approx. 10 seconds
until the
1
indicator appears in the
blower level display.
Then press, in turn:
- the lighting control
,
- the
control, and then
- the lighting control
.
When power management is turned on,
the
1
and
B
indicators will be
continuously lit.
When it is turned off, the
1
and
B
indicators will flash.
Press the
control to deactivate
power management.
The
1
and
B
indicators will flash.
Press the
control to activate power
management.
The
1
and
B
indicators will be
continuously lit.
Confirm the setting by pressing the
delayed shutdown control
.
All the indicator lights will go out.
If you do not confirm the new setting
within 4 minutes, the ventilation hood
will revert to the previous setting.
Safety shut-off
If power management has been
deactivated, the ventilation hood will
switch itself off automatically after
12 hours if it has been left on (blower
and overhead lighting).
To switch it back on, press the On/
Off
control or the lighting
control
.
