Cleaning and care
37
Fitting/replacing charcoal filters
The slots for the charcoal filters are
located above above the grease filters.
Remove the lid. It is held in position
by magnets.
Take the charcoal filters out of their
packaging.
Insert the charcoal filters into the
slots as far as they will go.
Replace the lid.
When to change the charcoal filters
Replace the charcoal filters when they
no longer absorb kitchen odours
effectively, and at least every 6 months.
The operating hours counter will remind
you to replace the charcoal filters by
lighting up the charcoal filter symbol
.
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be re-
set.
To do this, with the fan switched on,
press the operating hours control
twice, then hold it for approx. 3
seconds until only the
1
is flashing.
The Charcoal filter symbol
will go
out.
If you want to replace the charcoal
filters
before
the operating hours
counter has reached its maximum:
Press the operating hours control
twice and hold it for approx. 6
seconds until only the
1
is flashing.
Disposing of charcoal filters
Used charcoal filters can be disposed
of with normal household waste.
