Changing settings
24
Adjusting the grease filter filter
saturation indicator
The filter saturation indicator can be set
to suit the customer’s cooking habits.
The factory default setting is a cleaning
interval of 30 hours.
- Select a shorter interval of 20 hours if
food is fried regularly.
- A shorter cleaning interval is also
recommended if the customer only
cooks occasionally. This will prevent
grease buildup from hardening and
making cleaning more difficult.
- Select a longer cleaning interval of 40
or 50 hours if the customer uses very
little fat when cooking.
Touch the On/Off switch
.
All symbols light up with reduced
brightness.
Press and hold the delayed shutdown
control
until the grease filter
and charcoal filter
symbols light
up.
Touch the grease filter symbol
.
The grease filter symbol
and one of
the blower power level indicators will
flash.
The indicators
1
to
B
show the current
time setting:
1
............................................... 20 hours
2
............................................... 30 hours
3
............................................... 40 hours
B
.............................................. 50 hours
Touch the relevant digits to select the
desired duration.
Confirm your choice by touching the
grease filter control
. If the
selection is not confirmed within
4 minutes, the system will revert to
the previous setting.
