Cleaning and care
32
Installing/replacing the charcoal
filters
The matching frames must be installed
in order to use the charcoal filter.
Follow the directions on the
installation sheet.
Remove the grease filter from the
ventilation hood.
Remove the charcoal filter packaging.
Push the charcoal filters into the
frames until they engage firmly.
Reinsert the grease filter.
To remove the charcoal filters, press
the holder clip forward slightly and
pull the filters down to remove them.
When to change the OdorFree
Charcoal Filter
Replace the charcoal filters when they
no longer absorb kitchen odors
effectively, and at least every 6 months.
The filter saturation indicator reminds
you to regularly replace the charcoal
filters by illuminating the charcoal filter
symbol
.
Resetting the filter saturation
indicator for the charcoal filters
After changing the charcoal filters, the
filter saturation indicator must be reset.
Touch the charcoal filter control
for
approx. 3 seconds with the blower
switched on until only the indicator
light for level
1
is flashing.
The charcoal filter symbol
will go
out.
Disposing of charcoal filters
Used charcoal filters can be disposed
of with normal household waste.
Reactivatable charcoal filters
Reactivatable charcoal filters are
available for this ventilation hood. They
can be used several times after being
reactivated in the oven.
Please follow the operating instructions
supplied with the filters.
