At the end of the cooking
duration
At the end of the set cooking duration,
an audible tone will sound, 3 zeros will
appear and "h" will flash in the display.
^
Switch the appliance off by pressing
the function selector.
The fan will continue to run for a while
after the oven has been switched off. If
you want to reduce the run-on time, you
can do so by removing the water
container as soon as you have
switched the appliance off.
Steam will escape when the door is
opened. Step back from the
appliance and wait until the steam
has dissipated.
When opening the appliance, take
great care that hot water which may
have collected in the drip channel in
the door does not overflow.
Also when taking the condensate
tray or cooking containers out of the
oven, take care not to spill the
contents. Do not come into contact
with hot steam and do not touch the
hot oven sides. Danger of burning
and scalding.
After use
^
Remove the condensate tray and
empty it.
^
Remove the water container and
empty it. Push the water container
upwards slightly when removing it
from the appliance.
^
After each use, clean and dry the
whole appliance as described in
"Cleaning and care".
^
Leave the door open until the
cooking compartment is completely
dry.
The appliance is designed in such a
way that there will always be a little
residual water left in the water
container after use. If there is no
residual water, there is something
wrong. Call the Service Department.
Insufficient water
Insufficient water is indicated in the
display by the flashing
p
symbol. An
audible tone will also sound during
operation.
^
Check the water level and add water
if necessary.
^
Push the water container into the
appliance until it connects.
^
Close the door.
You can now use the oven as normal.
Operation
18
Summary of Contents for DG 1050
Page 50: ...50 ...
Page 51: ...51 ...
Page 52: ...Alteration rights reserved 3209 M Nr 06 643 810 04 ...