Setting the altitude
The steam oven must be run through
the DESCALE
k
program before the
first use to set the unit for the altitude in
your area.
If this is not done, too much steam will
be released from the appliance during
use.
^
Fill the water container with a quart
(1 l) of water (do not add descaling
agent), place in the appliance and
close the door.
^
Select DESCALE
k
using the
program selector.
The following will be displayed:
^
Press
Start
.
The time will count down from
33 minutes as shown in the display.
Do not turn the program selector
during this period or the descaling
program will have to be restarted.
A tone will sound when there are
8 minutes remaining and the following
will alternate in the display:
^
Empty the water container, refill it with
another quart (1 l) of fresh water, and
close the door.
^
Press
Start
.
The above procedure must be repeated
two more times when the tone sounds.
Do not be alarmed at the amount of
steam emitted.
Before using for the first time
14
