Interrupting a program
You can interrupt a program at any
time.
^
Press
Stop
.
The colon in the display stops flashing.
The light bar between
Stop
and
Start
comes on.
The heat is turned off and the remaining
cooking time is stored in memory.
You can now open the door, for
example, to stir something.
,
Hot steam will escape when the
door is opened.
Use caution when taking containers
out of the oven.
To continue:
^
Close the door.
^
Press
Start
.
If you have only interrupted the
program briefly, you will see the time
remaining continue to count down after
the door has been closed.
If the program has been interrupted for
a longer period, the oven will have
cooled and will need to heat up again.
In this case, the display will show the
current oven temperature rising until it
reaches the set temperature. When the
set temperature has been reached, the
display will switch over to show the
remaining cooking time.
Changing a program
To change a program while the oven is
in use:
^
Press
Stop
.
^
Turn the program selector to the new
program.
^
Enter the new cook time.
^
Press
Start
.
Operation
26
