Appliance front and housing
The appliance front, controls and
housing (not on built-in appliances)
should be cleaned using a Miele
E-Cloth (see "Optional accessories") or
a mild solution of hot water with a little
washing-up liquid, applied with a damp
cloth. Then wipe over with clean water,
and finally dry with a soft cloth.
See data plate for the type of front.
Glass
For appliances with glass fronts, a
proprietary glass cleaning agent may
be used.
Stainless steel
Stainless steel surfaces can be cleaned
using a Miele E-Cloth or with a
proprietary non-abrasive cleaning
agent designed specifically for use on
stainless steel.
To help prevent resoiling, a conditioning
agent for stainless steel can also be
used.
Follow the manufacturer's instructions.
See "Optional accessories" for details
of accessories for cleaning and care.
Aluminium
Parts of the appliance front made from
aluminium and the metal coloured
lacquered controls are susceptible to
damage from scratches and abrasion
aswell as from alkaline and acidic
substances. It is therefore essential to
clean them with care, as described
above. Do not use cleaning agents for
stainless steel or descaling agents on
these surfaces. Remove soiling immedi-
ately, as leaving it could result in the
surface discolouring or altering.
Cleaning and care
48
Summary of Contents for DG 2351
Page 73: ...73 ...
Page 74: ...74 ...
Page 75: ...75 ...
Page 76: ...Alteration rights reserved 0407 M Nr 06 159 490 05 en ...