Fitting the feet
The appliance is supplied with four feet.
If the building-in recess is
350 mm
high, the steam oven is installed
without
fitting
the feet.
If the building-in recess is 360 mm high, the feet need to be screwed into the
appliance before installing it in the recess.
If the appliance is being installed in a counter top casing (DGSG) or in a
building-under casing (DGUG) the feet must not be fitted.
^
Carefully lay the appliance on its back and screw the four feet into the holes
provided (see illustration).
Installation
69
Summary of Contents for DG 2351
Page 73: ...73 ...
Page 74: ...74 ...
Page 75: ...75 ...
Page 76: ...Alteration rights reserved 0407 M Nr 06 159 490 05 en ...